|
|
|
N2.10 |
|
Conversions Liter x .2642 = Gallons daNm x 7.3756 = Ft lbs. |
|
Standard Equipment |
|
Optional Equipment |
|
Keel Cooling Floating ground/ two pole electrical system Sea Water strainer and hoses Mechanic stop cable Racor filter/fuel hoses Exhaust system Throttle/shift control Sea water system Two & three blade prop (fix or folding) B3 panel C3 full instrument panel Power take off Second alternators Shaft coupling Down angle/V-drive trans Y harness Up to 8 meter harnesses
|
|
NANNI DIESEL uses and recommends |
|
Control cables mounting points Exhaust elbow with water injection Heat exchanger Engine flexible mounts Wire harness 2 meters Fuel/oil filter Mechanic gearbox or Sail Drive Owner's manual Thermostat Warranty certificate book Electrical system 12 V |
|
C3- 10.63 x 7.4 iiinchesinches |
|
A3 - 4.72 x 8.07 inches
|
|
Technical specifications |
|
|
Power * |
7.36 kW (10 hp) |
|
Rated RPM * |
3000 RPM |
|
Displacement |
0.479 liters (29,23 cu inch) |
|
Number of cylinders |
2 cylinder in line |
|
Bore and stroke |
2.64'' x 2.68'' (67 mm x 68 mm) |
|
Compression ratio |
23:1 |
|
Combustion system |
Indirect (E-TVCS) |
|
Intake |
Atmospheric |
|
Cooling |
Heat Exchanger |
|
El. equipment / Alternator |
12 V / 40 A |
|
Instrument panel |
Eco 3 |
|
Transmission |
Mechanic (TMC 40) ratio 2.6:1 |
|
Engine Max Install. Angle |
15° |
|
Sail Drive |
SD 10 ratio 2.52:1 |
|
Dry weight (with gearbox) |
191.4 lbs (87 kg) |
|
Dry we t (with Sail Drive) |
271.2 lbs (123 kg) |
|
Connections |
|
|
Exhaust |
1.57'' (40 mm) |
|
Fuel |
0.31'' (8 mm) |
|
Sea Water |
0.79 (20 mm) |
|
* At engine flywheel, according to ISO 8665-1 |
|
|
Panel Eco 3 |
|
- Oil pressure warning light and acoustical alarm |
|
- Water temperature warning light and acoustical alarm |
|
- Battery charge light & audio alarm |
|
- Glow plug pilot light |
|
- Ignition start key |